Dual DVI
I'd like to know the suggested cabling for connecting two Dell 1905FP monitors to a BOXD54250WYKH1 I'm considering buying for my workplace. I thought this would be straightforward, but in reading this...
View ArticleDN2820FYKH w/ Insignia TV Goes Blank after bios
Today we attempted installing a DN2820FYKH at a client office. I connected it to a Insignia TV via HDMI.However, after the BIOS prompt -- the screen goes blank. From how the box behaves, it appears...
View ArticleClik here to view.
Intel NUC using smart connect
Hi, Recently I've purchased an Intel NUC and everything is running beautifully except for the Smart connect. I keep getting the error"2000 Error communicating with WLAN device"Is anyone familiar with...
View ArticleNUC D54250WYKH not booting
Hi everyone, I have a problem with my NUC D54250WYKH, it's stopped booting up. It had been running flawlessly since i bought it a month ago, with 2 x 4gb Kingston Hyperx 1600Mhz 1.35v RAM, and a 120GB...
View ArticleMy D54250WYKH does not start after BIOS update
Hi, I have a problem with my NUC. I am running Windows 8.1 64-bit. I downloaded the latest executable driver for my NUC (WYLPT10H.86A.0030.EB.EXE) from this link:...
View ArticleD34010WYB does not continue POST without USB keyboard attached
Maybe I'm overlooking something obvious (or less obvious than I hoped it would be), but my D34010WYB stays put on the "Intel NUC" POST splash until I connect a USB keyboard. If the keyboard is present,...
View ArticleD34010WYK issue with USB 3.0 HD
Hello,I have two problems since I bought my nuc.I use it with an external USB 3.0 western digital elements 1To disk.I installed latest Nuc versions software : bios version 28, USB 3.0 controller...
View ArticleWindows 7 stop errors for Intel N2820 due to Intel USB 3.0 driver
For my Intel N2820 using Windows 7 64bit I have experienced sporadic stop errors (blue screens) some time (1-5 minutes) after re-activation from Windows 7 sleep mode.The stop errors disappeared after...
View ArticleClik here to view.
NUC Atom DE3815TYKE doesn't boot without screen
I have an Intel NUC Atom DE3815TYKE. My problem is that it doesn't boot if there is no screen plugged in the VGA port. I updated the BIOS to the latest version (0036 dated October 23, 2014), but the...
View Articlehello, I have a sound problem when I plugged into the port of the speakers...
hello,I havea sound problemwhen Iplugged intothe portof the speakersandthe volume isveryloudI hearnoise.Isthisis adriver issueorhardware?thank you
View ArticleSound issues on D54250WYKH
Hello, I have my NUC connected to my audio receiver through the analog port on the front. But when I move my mouse (or do anything like moving a window) there is a noise coming from the speakers. There...
View ArticleNo Boot and Video after fail Firmware Upgrade D54250WYK
Hello, I need some help. I have an D54250WYK and I've tried to upgrade the firmware to the latest version using the windows BIOS update tool. After restart the NUC never boot again and there is no...
View ArticleAudio/Graphics driver problem on D54250WYKH
Hi, I have an Intel NUC D54250WYKH and I am running Windows 8.1 and XBMC on it. I have a problem with the HD audio formats not working. I have checked this webpage to verify my audio settings:Windows...
View ArticleClik here to view.
Poor volume levels from N2820 running Windows 7?
So I mentioned this on another thread in relation to DTS-HD on the same platform, but given that its a different feature set I thought I would post a seperate thread. Running the latest (or any drivers...
View ArticleCapability of intel NUC
Hello im about to buy Intel NUC D54250WYK i had a few questions 1) Can you please tell me the current draw and the voltage draw for the intel nuc because im planning to use it in a project. 2) Is the...
View ArticleIntel NUC D54250WYKH, Flickering screen
My screen flickers at random. I have tried Fedora 20 and Windows 8.1 clean installs and its still happening. I have the latest bios as well. The screen is a new BENQGW2750. I have Corsair VENGEANCE...
View ArticleGraphics won't stay at 60fps; keeps reverting to 59
I have a 54250WYKH with 2 Gb memory, a 256Gb SSD and a 500Gb hard drive installed, running Windows 7 Pro. I use a Samsung 2494HM monitor using the HDMI cable connection. The monitor's native...
View ArticleD54250WYKH - display (display port) shuts down unexpectedly after...
I have trouble with sudden loss of display signal/shutdown with use of display port to monitor. The display will never wake up again until you run windows installation again, booted from USB. I can...
View ArticleClik here to view.
Windows 7 stop error after sleep mode for DN2820
My Intel NUC DN2820 sporadically exhibits Windows 7 stop errors (blue screens) shortly (about a minute) after resume from sleep mode.I have already performed memtest86+ for eight cycles without any...
View Article