Clik here to view.
DC54250WYK cannot operate headless with Logmein
I have setup a DC54250WYK with Windows 7 and intend to use the system in a remote area without a monitor. When the HDMI is not connected to a monitor I am unable to view video with either VNC or...
View ArticleAnnoying crackling sound on NUC D34010WYK2
I just bought a Nuc D34010WYK2 and after installing Win 7 and all the latest drivers I get a very annoying crackling sound on my sound system whenever anything on the screen changes. Moving mouse...
View ArticleDoes anyone sell an inline battery that would let me use the NUC like a laptop?
Does anyone sell an inline battery that would let me use the NUC like a laptop? I suppose it would have to be close to 19v or the power supply would overcharge it.
View ArticleDN2820FYK - no Display Scaling under Win7
Hi folks. I've just got a DN2820FYK, which after a bit of fuss I got Windows 7 Pro x64 running on. Problem is, my TV's default overscan setting means that a good part of the screen is not visible....
View ArticleD54250WYK USB3 problem
Hi, I have problems with the USB3.0 controller on the D54250WYK NUC board. It seems that the Linux xhci_hcd driver is not fully compatible with the Intel USB3 controller which results in popping audio...
View ArticleCoDAW on Intel NUC
This is just a facts post! The Intel NUC is actually the first desktop PC capable of running 3D video games without extra graphics card! Hardware: Intel Nuc Kit D54250WYKH + 16 GB ram + 256GB SSD with...
View ArticleClik here to view.
Overscan issue
Hi, So my TV does not save my pictures settings to fix the overscan issue. The only way to fix this is to customize the aspect ratio via Windows.. however the graphic drivers for the Intel NUC N2820...
View ArticleDN2820FYK no signal randomly
Dear support, I've been having trouble with my nuc in that the signal will randomly cut out. Sometimes there's no sound or it crackles. My TV works fine with all other hdmi devices and this problem...
View ArticleD54250WYKH problems after driver install
Hi! I just today bought a D54260WYKH, installed a 1tb 2,5 disk and 4gb ram into it. Fired it up and installed windows 8.1 on it using a usb stick. Everything worked fine. Then I decided to upgrade the...
View ArticleI need a CCC (China Quality Certification Center Certificate) ASAP, please!
I have a BOXD54250WYK stuck in Shanghai due to customs requiring a copy of the actual certificate! I was able to get one from Samsung, see attached. Any ideas where I can track this down? I have tried...
View ArticleA disk read error occurred - D54250WYK
Hi, I put together an D54250WYK with an Intel SSD 520 120GB, running Windows 8.1. It's around a month old. Ever so often on reboot, it will fail on startup with the text-mode error "A disk read error...
View ArticleNUC DN2820FYKH: WARNING: Processor thermal trip at boot
Hello, When I start my brand new NUC, at startup I have almost always this message: "WARNING: Processor thermal trip" I updated to the latest bios, revert bios settings to default (didn't touch before...
View ArticleClik here to view.
D54250WYK 'headless' issue?
So I just recently received one of these new machines. Overall I'm impressed but one thing I've noticed is that when no connected display is active - for example if the display port goes into a HDMI...
View ArticleInfrared driver not working Windows 8.1 & NUC
I've installed the latest driver 2.9.1007 yet Windows is saying: Your infrared receiver has stopped working properly because a compatible driver isn't available for this version of Windows.The model...
View ArticleIntel NUC D54250WYKH not recognizing 2.5 SATA drive (Samsung M9T)
I was actually able to install Windows 8.1 Update 1 on the mSATA drive as the system drive and the second one, at the 2.5" slot was identified on the installation. But then after shutting down once it...
View ArticleAnnoying crackling sound on NUC D34010WYK2
I just bought a Nuc D34010WYK2 and after installing Win 7 and all the latest drivers I get a very annoying crackling sound on my sound system whenever anything on the screen changes. Moving mouse...
View Articlevsphere 5.5 on NUC D54250WYKH2
vsphere 5.5 on NUC D54250WYKH2, does anyone have install on it? do I need to buy one msata drive or only with my 2.5 hdd works?
View ArticleDN2820FYK no kb or mouse function after windows 7 repair disk is loaded
I bought the lg gp50nb40 so I could have a recognizable optical boot drive to run the repair disk from window 7 maintenance. the drive is recognizable in F10 and I can select the dvd drive to boot...
View ArticleClik here to view.
New NUC will not start
I just bought an Intel NUC DC53427HYE, equipped with a Crucial 128GB M4 SSD3 and 2*4GB Crucial DDR3-1600 SODIMM 1.35V 204 PIN (as recommended by Crucial). However, the unit won't start. When I press...
View ArticleNuc won't turn on
I have bought a intel Nuc D54250WYK1 with an intel I5 4250U processor. I installed the following hardware: Samsung Electronics 840 EVO mSATA 0.85-Inch Solid State Drive MZ-MTE250BWCrucial 16GB Kit...
View Article