Fan noise from D54250WYK
My D54250WYK has avery annoying fan noise. I have mentioned it in two other threads, but I wouldlike to get Intels comment on this issue. I have had eightcomputers (all with ‘Intel Inside’) and other...
View ArticleD54250WYK USB3 problem
Hi, I have problems with the USB3.0 controller on the D54250WYK NUC board. It seems that the Linux xhci_hcd driver is not fully compatible with the Intel USB3 controller which results in popping audio...
View ArticleWhat is the maximum RAM clock rate for a 5 gen NUC
The G.Skill F3-2133C11S-8GRSL with a clock rate of 2133 MHz is listed as tested, but in the specification is 1333/1600 written and on the webpage 1333/1600/1866? What is the actual maximum RAM clock...
View ArticleNo video signal on my NUC D54250WYKH
I have a new NUC D54250WYKH. It is connected to my Acer v198w via an adapter that converts the NUC's HDMI mini jack to a standard VGA adapter out, which then connects to the VGA IN on my Acer monitor....
View ArticleD54250 blank screen during boot when using display port, works fine when os...
UPdated to latest Bios, same result
View ArticleClik here to view.
Can`t access BIOS after Ubuntu 14.04 install
So, I finally desired to install Ubuntu 14.04 LTS on my NUC DN2820. And I put on Fast Boot in BIOS, and my Logitech K360 and M705 has a little problem, the NUC won`t detect the what I do.I`m using...
View ArticleIs the Intel community board server down? Can not send emails or reply to...
Can't seem to respond to conversation either on this site or via email.
View ArticleNUC 340101wyk unable to use the USB 2.0 controller. Need to set USB to eHCI
I have a USB 2.0 eHCI device that is not compatible with a USB 3.0 xHCI controller. I have connected to the USB 2.0 connector on the board, but the device manager still shows that connector on the USB...
View ArticleNUC D54250WYKH "Ticking sound" when using hdmi to pre-amp - when there's no...
- it starts in a few seconds after pausing or stoping youtube or something else music/sound. Tick-tick every second. Bad or to small PSU? I'd try another hdmi cable. Didn't solve the problem.I'd try...
View ArticleD54250WYK 3D Playback Issues
Hello, I have been using my NUC as an HTPC for months but have not had any luck playing 3D content. The NUC does not seem to output a 3D signal or send a 3D signal to my television to tell it to switch...
View ArticleNUC DN2820 FYKH in combination with a Philips TV
I use the NUC DN2820FYKH in combination with a PhilipsTV and a harmony touch RC. The IR signal for on/off for both the Philips TV and the nuc is the same.So when I turn on my TV the NUC goes on as...
View Article[bug] DN2820FYKH will not resume from hibernation
Hello, I am using my DN2820FYKH as a media centre PC. It runs Windows 7HP (64bit) and DVBviewer Pro as media centre software. DVB-C TV reception is done via an external USB receiver.For scheduled TV...
View ArticleIntel NUC DN2820FYK IR not working
Hi, I have a problem with my DN2820FYK.I don't get my Remote Harmony Touch on Openelec 4.0.3 to work. I already tried different templates like "Windows Meder Center", "Windows Media Center SE", "XBMC",...
View ArticleClik here to view.
NUC board schematic
Can you please post the schematic (pdf or Orcad format) for the Intel NUC board (D34010WYB)? Thank you.
View Articleswitch usb ports from xhci to ehci?
Is there any way I can switch the usb ports (any/all of them) from xhci to ehci drivers? My mceusb IR transmitter does not work with the usb3 ports or the internal usb2 port on the Haswell NUC, in...
View ArticleDN2820FYKH - missing XHCI/USB3 BIOS options - Need to set controller to EHCI...
Hi, I have a client who runs a USB controller for a laser cutter for timber. The NUC is experiencing communication dropouts and lockups when trying to communicate with the laser cutter controller but...
View ArticleD54250 blank screen during boot when using display port, works fine when os...
UPdated to latest Bios, same result
View ArticleIntel NUC D54250WYK2 - Sound problem with hdmi
Hi I have a NUC 4250, and I've had it for a few days now. I use HDMI for picture and sound. There is nothing wrong with the picture, but the sound stops and starts with about 2-minute intervals. The...
View ArticleNUC D34010WYK won't turn on via Remote after installing BIOS Update...
After I've installed BIOS Update WYLPT10H.86A.0033, i'm no longer able to Power On my NUC (D34010WYK) with my Logitech Harmony Remote Control.Consumer Infrared is enabled in BIOS, and I can use the...
View ArticlePowerDVD 14 no longer plays non-Blu Ray files in 3D
Something has changed with the newest graphics driver. I have an Intel NUC D34010WYKH (BIOS 033) that I have hooked up to my 3D projector (BenQ W1070) via an HDMI 1.4 cable. Playing 3D blu-rays with...
View Article