DN2820FYKH - Win7 support coming?
I just had the unpleasant experience of finding out that my new NUC doesnt support Win7. Well I hate Windows8, I cannot stand the massive change the UI underwent. So, Intel, will ye be releasing Win7...
View ArticleIntel Nuc D34010WYK and Epson WirelessHD not working
I have an Intel Nuc D34010WYK and it sucessfully displays an image with my Epson projector EH-TW6100W when i connect it directly to HDMI1 with a cable. The Epson projector supports also WirelessHD. The...
View ArticleWindows 2012 for Intel NUC
Did anyone made the attempt to install Windows 2012 in an "Intel NUC D54250WYK1"? Thanks. JC
View ArticlePCI-Express on the NUC DCCP847DYE
Hi,I'd like to put the NUC DCCP847DYE to use monitoring WiFi traffic and I've got a couple of questions about its PCI-e ports.First of all, are both the full and half-sized PCI-e ports fully functional...
View ArticleIntel NUC DN2820FYK dead after BIOS update (0025)
Yesterday i finally received my DN2820FYK, i plugged it in the TV and the NUC was booting fine. I start a BIOS update using a USB key formatted with FAT32, the update is running fine, and at the end...
View ArticleNo USB power when D34010WYK is in Hibernate
Hi My Intel NUC D34010WYK has no USB power when is goes into Hibernate.I have tried to update the bios to version 24 - 2/10/2014 and update the USB 3 driver to version 2.5.3.34, that did not help. OS =...
View ArticleFirmware 024 Haswell Nuc - still the same problems
FW024: - Nuc still reboots with Openelec- now I can't even boot automatically via USB AT ALL - only manually!!!- my USB 3.0 Stick is still only recognised occasionally C'mon Intel! THAT'S NOT...
View ArticleSupported memory not working and more trouble
My brand new NUC DC53427HYE with Windows 7 SP1 x64 and 2 x 4 GB of memory from the supported list has two major problems: 1. It only gets through POST when the NUC has been off for an hour or so with...
View ArticleNUC - do I need to put memory in to see BIOS
Just bought a D54250WYK but haven't yet fitted memory or SSD. When I power it on I don't see any display on either the display port or HDMI. Is it DOA or do I need to put memory in to get as far as...
View Articlecomplete system hang, when starting memtest
Hi Everybody!I have several computers here. When i boot them with Opensuse-live-cd (x64) and performing the "memtest" at the bootmenu, everything works normal. No errors! When i press Escape, the...
View ArticleDN 2820 Power usage measurement
I plugged my NUC into a killawatt meter to see power usage running Win7 media center. It idles at 5W and uses 8-9 when displaying 1080 HD video streaming from my HD Homerun cable tuner. Never gets more...
View ArticleWhy won't Bitlocker work on NUC D34010WYK when it has TPM v2.0?
When attempting to enable Bitlocker on a NUC D34010WYK, I receive the following error message: "The Trusted Platform Module (TPM) on this computer doesn't work with the current BIOS. Contact the...
View ArticleFails to boot setup installer of Windows 7 Ultimate X64 using UEFI
Has anyone successfully booted to the UEFI installer on the D54250WYK? I'm on the latest 0022 UEFI BIOS. It stops with the Error: FILE: \EFI\Microsoft\Boot\BCD Status: 0x000000d.
View ArticleBroken IPEX connector
Dear all, When I installed my new wifi card into my NUC (DCCP847DYE) I had to remove the plastic cover on the mini IPEX connector.While pulling the plastic, one of the connector broke off from the...
View ArticleIntel NUC Kit DN2820FYKH no hdd or ssd found
i´m getting crazy but the system couldn´t reach any internal storage drives. there´s no drive listed in the bios after assembling it into the bay. after reboot the hhd led turns on for some seconds...
View ArticleDC54250WYK cannot operate headless with Logmein
I have setup a DC54250WYK with Windows 7 and intend to use the system in a remote area without a monitor. When the HDMI is not connected to a monitor I am unable to view video with either VNC or...
View ArticleCan´t Power On with IR anymore after a Battery Reset
After i had the PowerButton Bug, I made a Battery Cable reset now and my Powerbutton works again but i get a new Problem.Now i cannot start the Nuc with my IR Remote, before resetting the battery i...
View ArticleHaswell NUCs and Remotes
Has anyone got the Haswell NUCs working with the XBox 360 Media remotes?They are supposed to be MCE compatible. But nothing happens when I press the buttons in the remote. I am using the Xbox 360 Media...
View ArticleNUC D54250WYK - Win 7 - Remote won't power down just sleep mode
Hi, I am using a Media Center remote. The NUC will power up from a power off state with a press of the remote, but when I press to turn the NUC off it only goes into a sleep mode.Is there a utility to...
View ArticleDN2820FYKH - Win7 support coming?
I just had the unpleasant experience of finding out that my new NUC doesnt support Win7. Well I hate Windows8, I cannot stand the massive change the UI underwent. So, Intel, will ye be releasing Win7...
View Article