nuc dn 2820 starts after usb-action
My dn2820 starts after moving my mouse, plug in or out some usb device.I did not find a setting in the BIOS (025) to disable it.What wrong with my little nuc? Thx
View ArticleD54250WYK shuts down with windows Aero
I've installed windows 7x64 on my new NUC D54250WYK, which i bought on 06, February.Connection with external 27 - inch monitor via HDMI or Display Port.I've updated bios to the latest version (v.024)...
View ArticleHaswell NUC - No Signal when switching source
Hi All, I'm having a problem with my D34010WYK i3 Haswell NUC. I am currently running OpenELEC on the NUC, but the issue is not an OS problem, as it also occurs in BIOS (as well as Windows 7 for the...
View ArticleNUC d34010wyk doesn't boot with dual monitors
I have a miniDP to DVI as a primary monitor and miniHDMI to HDMI is a big screen TV. Both screens work, but after a reboot I only get to BIOS screen and it hangs after that. It only reboots...
View ArticleApparent BIOS update failure on D34010WYK
I just tried to update my brand new D34010WYK with the latest BIOS (WYLPT10H.86A v0024) via the updater for Windows. I got the prompt to reboot, which I did ... and this never booted again. I get no...
View ArticleD54250WYK and Cable Matters USB 3.0 to Giganet LAN
I am trying to install a second LAN port by using a USB adapter from Cable Matters. It works fine in a Dell Mini 10V running Win7 but it doesn't appear in the list of devices when I install it on my...
View Articlelost 1080p after upgrading bios DN2820FYKH
I am running debian-7.4.0 . I first installed debian from a usb install image with full 1080p support dueing hte installation process but then I found I had to upgrade the bios to get past the f2 bios...
View ArticleIR keyboard for ubuntu?
I just installed Ubuntu on my D34010WYK and everything is slowly up and running. I got the IR to work and use my Harmony Smart Control configured as MCE and it works. But when I ran W8 I also used to...
View ArticleClik here to view.
BSoD / Intel NUC D54250WYK + Haswell Graphics Drivers 6.14.10.5445
I installed Windows XP SP3 in D54250WYK.I could install almost drivers excepted the Display Driver.I installed XP Haswell Graphic driver 6.14.10.5441 and 6.14.10.5445, but it shows BSoD after reboot....
View ArticleDN2820FYKH Availability
Is it me or is the DN2820FYKH no longer available already? I ordered one two weeks ago and its been listed as 'Your order has been placed with one of our suppliers who will ship it directly to you',...
View ArticleDN2820FYKH DTS-HD?
I've setup my 2820 NUC kit, and under supported audio formats in windows 8.1 DTS-HD is not listed. I've installed all the drivers provided in the NUC driver bundle at Download Center , and attempted to...
View ArticleClik here to view.
D54250WYK only 2 ch audio???
Hi there I have not been able to get multichannel audio on my NUC (D54250WYK). I'm from Denmark, so i apologize if you don't fully understand my problems, but when I play movies (either online, on my...
View ArticleD34010WYK does neither boot from USB 3.0 nor boots with plugged USB 3.0 drive
I have a new D34010WYK and I want to install Fedora from USB, but the nuc hangs when I'm trying to install from my Sandisk USB3.0 stick. A USB 2.0 stick was recognized properly. Same issue if I connect...
View ArticleCan't control NUC BIOS with a keyboard only
I have a NUC D54250WYB running BIOS version 18. If I boot with a USB keyboard connected, but not a mouse, I can get into the BIOS screens by pressing F2, but then the system does not respond to any...
View ArticleNext great job at DN2820FYKH
The new Windows 7 USB3.0 drivers are great.After installing and reboot, no one of the 3 USB ports will work, they are dead.Under safety mode and in the bios, everything will work. Drivers unistalled,...
View ArticleIntel NUC D34010WYK PROBLEMS WITH BOOTING AND WINDOWS INSTALLATION
Dear Intel, I am writing you this message concerning the INTEL NUC D34010WYK you are so proud of. I have bought two of these units hoping that I can install a copy of Windows 7 64 bit ultimate. I have...
View ArticleFirmware 25 for Haswell Nucs - what a joke!
I'm getting really mad... Booting from usb still doesn't work!Standby in Openelec still makes the nuc hang! INTEL, ARE YOU SERIOUS??? If any of the Intel reps care to reply, please spare me with...
View ArticleNUC Haswell reboots after shutdown
If I chose shut-down it turns off but starts again. How so fix? Ubuntu 13.10. NUC Haswell BIOS version: 0022 (same with 0018). I just found this: Re: D54250WYK Shutdown Rebootsbut the asker didn't...
View ArticleProcessor Thermal Trip on D54250WYB
Hi there, Great that I've found this forum... A week and a half ago, my D54250WYB board shut itself down overnight. At the time it was idling, and in the BIOS was an event "Processor Thermal Trip". I'm...
View ArticleDN2820FYKH Availability
Is it me or is the DN2820FYKH no longer available already? I ordered one two weeks ago and its been listed as 'Your order has been placed with one of our suppliers who will ship it directly to you',...
View Article