IR Power On with D34010WYK Nuc
Have had a Nuc for a few months now but only just purchased a new Logitech Harmony Touch remote and cannot get my NUC to power on via IR. I have to power on via the case button and once my OS has...
View ArticleCMOS battery problem (NUC D54250WYK)
Hello,I am the owner of a NUC D54250WYK for less than one week.Everything is OK except one thing: I have a BIOS message saying that date/time cannot be kept. Every time I unplug the equipment, the same...
View ArticleBios recovery problem
Hello I cant get my dn2820fykh to recover the bios, i have succesfully recovered the bios 3 times befor on this nuc but now it simply won this time.I have a problem that when legacy bios is activated...
View ArticleDN2820FYKH DTS-HD?
I've setup my 2820 NUC kit, and under supported audio formats in windows 8.1 DTS-HD is not listed. I've installed all the drivers provided in the NUC driver bundle at Download Center , and attempted to...
View ArticleNUC on a boat
I would like to use a D54250WYB NUC on my boat. I have some batteries and the voltage is between 12 and 14,8 Volt (charging). When the batteries are flat I might have 11 volt or lower, but than I won't...
View ArticleIntel NUC D54250WYK1 hard drive goes missing in BIOS
Hello, I have two D54250WYK1 NUC computers with MSATA hard drives from different vendors (Crucial and Evergreen.) One is running a BIOS version from September, 2013. The other is running the latest...
View ArticleLAN device not detected for Windows 2012 R2
All other drivers are OK, but when I try to install the LAN driver (PROWin8.1_64_18.7) a warning Message shows up stating "Cannot install drivers. No Intel(R) Adapters are present in this...
View ArticleD34010WYK and USB 3.0 advice needed.
Recent purchase of D34010WYK NUC (< 1 week). Installed BIOS Version is 0021. OS Installed is Windows 8.1 with latest updates. Problem: USB 3.0 External hard drives (3TB & 4TB Seagate) hosting...
View ArticleD54250WYKH2 sound / graphic problems
Hello Just got my D54250WYKH2 today.After some inital issues with not getting HDMI to work, i got a miniDP to HDMI adapter. After that everything went fine with the windows 8 install.(bought a brand...
View ArticleNUC Antenna Cable Replacement
I've recently purchased the Intel AC1200 (7260HMW) 7260.HMWWB to add to the D54250WYKH. During installation, one of the leads on the antenna that connect to the wifi adapter slipped off and I cannot...
View ArticleClik here to view.
DN2820FYK - no Display Scaling under Win7
Hi folks. I've just got a DN2820FYK, which after a bit of fuss I got Windows 7 Pro x64 running on. Problem is, my TV's default overscan setting means that a good part of the screen is not visible....
View ArticleSound "clicking" via analog output on DN2820FYKH
Hi, I've recently installed a new NUC to serve as an HTPC (Windows 8.1).These new models come with an analog 3.5 headphone jack on the back, which will serve my music needs for the time being.When I...
View ArticleDN2820FYK ITE CIR Wont work under 8.1
NUC will start with remote but wont respond under Windows 8.1 Latest driver is installed and appears to be fine in device manager anyone out there found a resolution to this or have the same issue?...
View ArticleNUC d34010wyk doesn't boot with dual monitors
I have a miniDP to DVI as a primary monitor and miniHDMI to HDMI is a big screen TV. Both screens work, but after a reboot I only get to BIOS screen and it hangs after that. It only reboots...
View ArticleNUC kit D54250WYKH: video playback stuttering in Windows Photo Gallery...
Hi all, Just bought this kit and put it together with an 8gb SODIMM and 120gb SSD with Windows 7 Pro x64. Installed Windows Essentials 2012 Photo Gallery on it so that we can run a screen saver with...
View ArticleIntel NUC D54250WYKH Memory issue
Hi i'm trying to get my newly purchased NUC D54250WYKH up and running and keep running into issues. I have not been able to boot the NUC at all and the led code seem to tell me it is a memory issue (3...
View ArticleD34010WYK does neither boot from USB 3.0 nor boots with plugged USB 3.0 drive
I have a new D34010WYK and I want to install Fedora from USB, but the nuc hangs when I'm trying to install from my Sandisk USB3.0 stick. A USB 2.0 stick was recognized properly. Same issue if I connect...
View Article7260AC Wireless and the D54250WYK NUC failure plus other quirks
Set up the NUC with a Wireless & BT Intel 7260AC, Msata Drive, and 4GB RAM single stick. Installed OpenELEC and XBMC. Everything ran perfect for a week. Now I cannot connect to my WIFI router. I...
View ArticleNUC Kit D54250WYK memory error on bootup
Just received the new NUC Kit D54250WYK yesterday and transferred the components from a 1st generation i3 Nuc....which ran perfect. The new NUC wont boot and is showing the 3 blink memory error. I...
View ArticleDN2820FYKH doesn't like SSDs
Hi, My Intel NUC DN2820FYKH doesn't seem to like SSD's. First the background: Memory Used: 4GB DDR3L-1600 Kingston (Intel NUC) p/n KVR16LS11/4SSD 1: Crucial M500 120GB (CT120M500SSD1) doesn't work (see...
View Article