Quantcast
Viewing all 18457 articles
Browse latest View live
↧

NUC - Power on via VPRO/AMT fails

July 26, 2015, 1:59 am
$
0
0

Hi,

 

I have 4 x D53427RKE (all purchased at the same time with an identical config a couple of years ago) and three of them have the same problem. If they are shutdown by a user (from within Windows 8.1) and then left for an hour or more then vpro/amt power on stops working. The fourth D53427RKE does not have this problem and will successfully power on even days after being shutdown.

 

Very strangely, if I try to power on the three D53427RKEs after just a few minutes of being shutdown by a user then it works fine!

 

At all times I can access the vpro/amt webpage on all of the D53427RKEs and I can connect via VNC Viewer plus. It's just that the remote control power commands do not work.

 

All of them used to have the same o/s drivers and BIOS until, in desperation, I recently upgraded the BIOS on the three that fail to RKPPT10H.86A.0042.2015.0625.1859 from RKPPT10H.86A.0017.2013.0425.1251.

 

I have compared every BIOS setting between the three that fail and the one that works and they are identical.

 

Has anyone seen this before or can help me troubleshoot because there don't seen to be any log to see what is really happening?

 

Kind Regards,

↧
Search

NUC5i5RYK Resume from Standby Ubuntu

July 26, 2015, 3:41 am
$
0
0

I got a brand new NUC 5i5 and installed UbuntuMATE 15.04

So far so good, but after resuming from standby , grafics fails. Some small areas are shown, most not. No Buttons are visible to navigate.

BIOS is latest (0249)

 

any hints/remedies?

Thx in advance

 

 

PS. Why does BIOS shows as model "NUC5i5RYB" although it is a NUC5i5RYK i bought? 

↧
↧

4K playpack poor with NUC5i7RYH

July 10, 2015, 12:21 pm
$
0
0

Dearest Group,

 

I am having problems with playback of 4K video, especially from 'YouTube' with my i7 NUC.

 

. High processor usage.

. Fan running at high speed.

. Playback stuttering.

 

This is experienced in IE, Firefox and Chrome. I have read with interest on this forum that Google are using a computationally expensive codec with YouTube. However, it was stated that IE mitigates this problem - I still have problems with IE.

 

With 4K video downloaded onto the local hard drive and VLC used as the media player, I have good video but the fan is still very noisy - especially with complex scenes. However, processor usage is much reduced. I assume the GPU is now working hard?

 

Graphics driver 10.18.14.4222

BIOS 0249

 

Has anyone else got experience with 4K video on the NUC i7? It could be asking too much of the device as a media player and I need to reign in my expectations?

 

Thanks,

 

Richard

↧

NUC 5i5RYK BSOD after installing W7 64bit

July 26, 2015, 6:58 am
$
0
0

I just loaded W7 64 bit on this machine - the very day I had done this, it gave 2 BSOD's. I attach the .dmp files - which seem to indicate something wrong with the Intel drivers.

 

Can anyone provide a different/better interpretation, as I am no expert in these things.

 

I have run FurMark for a few minutes to stress test the graphics, memtest to test the RAM, nothing now causes it to bluescreen. I have had it running overnight and it is now (apparently) fine.

 

Can I disregard the BSOD's as just one of those funny things which happen from time to time, or should I be worried?

 

rjstep3

↧

Intel NUC D54250: "No signal" after switching monitor back on

July 26, 2015, 10:55 am
$
0
0

I bought an Intel NUC D54250WYKH3 seven months ago and I have been having problems if I switch the monitor off when I am not working and switching it back on some time later.

 

The monitor will show 'No signal' and I have to wait a random length of time, possibly hours, for the monitor to display the screen contents.

 

I have upgraded the BIOS several times and I am currently at WY0040.BIO, but the problem still remains.

 

I am running Debian 7.7 and the situation can be significantly improved if I activate the screen saver before I switch the monitor off, so much so that I now stand a better than 50% chance of the monitor working when I switch it back on.

 

I am using the mini Display Port (DP) port on the NUC connected to the DP port on the monitor. I believe that it is the NUC at fault as connecting a Raspberry Pi/Raspbian to the HDMI port or a dual boot Windows 7/Linux to the DVI port all display the screen contents properly when I switch the monitor back on.

 

I would really like to make the connection 100% reliable because as it stands I cannot make the NUC my main PC.

 

I would be grateful if anybody has solved this problem. If not, is there any information that I can provide to help narrow down where the problem lies?

↧
↧

NUC NUC5i5RYH HDMI Sleep Issue

March 31, 2015, 11:48 pm
$
0
0

Guys,

 

Just picked up this little unit and turned it into an HTPC. So far it is working brilliantly but am having issues anytime the unit OS goes to sleep. I am running Windows 8.1. When the OS turns off the TV and then I move the mouse to return to the desktop instead all I get is fuzz. I have tried several versions of of Linux, run OpenElec, and have the same issue. Anytime the system puts the monitor to sleep the return to desktop just results in fuzz.

 

I have already updated all drivers along with the bios. Any help would be appreciated.

 

Abraham

Image may be NSFW.
Clik here to view.
↧

NUC5i5MYBE cannot enter MEBX after provisioning

June 4, 2015, 2:20 am
$
0
0

I have a NUC5i5MYBE, which after provisioning using WS-Management, I can no longer enter the MEBX.

 

When I type ctrl-p during bios boot the screen just freezes with the Intel NUC logo showing:

 

Image may be NSFW.
Clik here to view. NUC5i5MYBE mebx fail.jpg

 

Everything else about AMT seems to still be functional; I can still access the webui, and query the AMT bios via WS-Management.

 

For the most part I want to enter the MEBX so that I can perform a "Full Unprovision" which I can also achieve in a less subtle way (ie by shorting the bios reset jumper), but that is besides the point.

 

Has anybody else seen this problem? Is there a known workaround?

↧

Intel NUC and Windows Home Server 2011

July 27, 2015, 5:25 am
$
0
0

I bought Intel NUC D34010WYKH and tried to install Windows Home Server 2011. But the installation stopped when some devices were missing:

 

Other Devices

Ethernet Controller

PCI Simple Communications Controller

SM Bus Controller

Universal Serial BUS (USB) Controller

Unknown device

 

Now I can't yet install anything but first I need the controllers.  Home Server 2011 is based on Windows Server 2008 and sure there should be controllers for it.

 

Best regards

↧
Search

NUC5i7RYH pcie card on m.2 connector , card detected but not working

July 23, 2015, 7:21 am
$
0
0

Hi all,

 

I want to connect a pcie card for capturing video (Blackmagic decklink mini recorder). I bought several adapter M.2 (keyB) to pcie.
The adapter is well detected in the bios and indicates that the pcie card is 1x (that's true it's an 1x pcie card) and max speed 2,5G.

On ubuntu the card is detected but i can't capture video and the nuc fails.

 

Do i have something to do ?

I don't understand why it's not working, so weird.

 

Firmware ?

 

ekla@nuc:~$ lspci

03:00.0 Multimedia video controller: Blackmagic Design DeckLink Mini Recorder

 

ekla@nuc:~$ BlackmagicFirmwareUpdater status

0: /dev/blackmagic/io0 [DeckLink Mini Recorder] 0x45 OK

 

the adapter :

http://www.bplus.com.tw/PDF/P4SM2_brief.pdf

 

AnImage may be NSFW.
Clik here to view. IMG_20150723_112303.jpgy help would be appreciate.
Thanks to all of you

↧
↧

Intel HD 5500 - Nuc i3 Broadwell - games -17.2 Linux Mint Debian - no textures in games

July 27, 2015, 9:17 am
$
0
0

Hello all

 

I'm using an Intel Nuc I3 with Broadwell ans a graphic card Intel HD5500

My LM version is the last (17;2) and i using th 3.19.22 Linux kernel.

In many games (WarThunder, Euro Truck Simulator 2), textures appear dark and black. regardless of the setting. Which does not play to play.

 

what can I do ?

 

Thanks

 

RJ

↧

Monitor goes to sleep while booting into Windows 8.1 when eDP is enabled on NUC5i5MYHE

July 27, 2015, 9:51 am
$
0
0

I am working on NUC5i5MYHE and i enabled eDP in the bios, after enabling eDP during the boot up screen shows Windows 8.1 logo and then monitor goes into sleep. no response even if i use keyboard or mouse.

 

if i then disable eDP and boot up the NUC, i am able to get into windows without any issues.

↧

Boot problem! (Intel NUC5i7RYH )

July 26, 2015, 12:17 pm
$
0
0

Yesterday (Saturday) I've received the Intel NUC5i7RYH. After installing the SSD, Memory, OS and the necessary drivers (incl. latest BIOS) the NUC worked just fine.

Today (one day later) my NUC suddenly stopped working. My monitor won't recognise the mini displayport / mini HDMI anymore and the USB-connection  doesn't work either.

When I'm pressing the power-button, the screens stays off (black) and the NUC reboot itself within 30 seconds. After rebooting it's stays on for the rest of the time, without any signal.

It isn't even possible to enter the BIOS, because the screen stays black and the keyboard is not functioning. Is there anyone who can tell me how to solve this problem?

I use a Samsung 850 M.2 500GB SSD, Kingston SODIMM DDR3L-1866 kit 2x8GB hyperX Impact memory and Windows 7 Home Premium X64.

 

I've already tried to remove and reinstall the SSD and Memory modules.

↧

Unsupported Compression Method - Trying to Install LAN Driver

July 25, 2015, 9:26 am
$
0
0

Keep running into problems with this NUC5CPYH.  When I try to extract the files from latest LAN driver for this NUC I get "unsupported compression method".  If I download just the LAN driver or the bundled drivers, it is the same error on the LAN driver.  Anyone else come across this?

 

LAN: Realtek* LAN driver for Intel® NUC

Installs the LAN driver version 7.92.115.2015 for Intel® NUC products with the RealTek* Ethernet LAN controller.

OS: Windows 7, 64-bit*

 

Intel® Download Center

 

Just downloaded the latest versions of 7zip and WinZIp and neither would decompress the file.  Winzip says "Severe Error: Compressed data is invalid.".

↧
↧

NUC5CPYH Windows 10 64bit Video Driver

July 26, 2015, 1:34 pm
$
0
0

I have my brand new NUC5CPYH with Windows 10 64 bit installed, but can not find a driver that will work...HELP!

↧

NUC5i5MYHE does not recognize PCIe SSD

April 30, 2015, 8:18 am
$
0
0

Hi,

I'm trying to use a PX-G256 M6e PCIe SSD in the M.2 2280 slot of a NUC5i5MYHE, but the BIOS does not recognize the SSD:

Image may be NSFW.
Clik here to view. MYi50022.PCI.jpg

In another thread a user stated to successfully run a PX-G256 M6e in a NUC5i3MYHE with BIOS version 0028.

The latest BIOS version offered on Intels support page for the NUC5i5MYHE is 0022.

 

Does anyone successfully run a PCIe SSD in the NUC5i5MYHE?

If so, which model and with which version of the BIOS?

 

Thanks for any hints,

Michael

↧
Search

NUC i5 vPro problems

November 27, 2013, 3:17 pm
$
0
0

Hi there!

 

I just purchased an Intel NUC with the i5 ivy bridge chipset.  Specifically, DC53427HYE.  The most interesting aspect of this device to me is the Intel AMT feature.  I verified that this NUC has an Intel Core i5 3427U CPU, which, according to Ark, does in fact have vPro technology on board.

 

I have two problems so far.

 

First, entering the Intel MEBx configuration is *extremely* difficult.  I can get into the BIOS setup (F2), BIOS update (F7), and boot device selection (F10) quite easily.  But accessing the MEBx configuration via Ctrl-P is nearly impossible.  I have found that Ctrl-P works, about 1 in 100 times.  I've managed to get into MEBx a few times now.  It seems to be a very sensitive timing problem.

 

Secondly, when I have managed to get into MEBx, the default password does not work.  I have tried, "admin", "qd,in", and "P@ssw0rd".  None of these are accepted.  I have reset the BIOS/CMOS by closing jumpers 1 and 2 next to the memory modules, and tried "admin" and "qd,in" once again.  No luck.

 

I have updated the BIOS itself from the 4/25/2013 BIOS that it came with, to the 11/16/2013 version 0028.  Still no luck.

 

Please help?

↧

NUC5i7RYH do not boot, can't get to bios

July 24, 2015, 2:29 pm
$
0
0

I guess my coworker played with fast boot, but he do not know for sure.

 

I tried power button three beeps - no help. Black screen. Tried jumper off for BIOS refreshing. Nothing.

 

NUC is connected to Samsung TV.

 

My bad that I let him play with my toy

↧
↧

DE3815TYKE - not turning on , after bios downgrade

July 28, 2015, 1:22 am
$
0
0

first, update latest version bios : TYBYT10H.86A.0044.BI.ZIP

but can't booting my kernel.

 

second, downgrade old version : TYBYT10H.86A.0019.BI.ZIP

thence no screen.

 

third, recovery bios:  (plug usb, remove jumper) ...

later ..blinking power led : 30s on, 3s off..

and ram is too hot. (samsung 4GB)

and fan is running

 

 

fourth, ram remove and power on : power led is continuos on!

and board still not turn on


 

i can't solve the problem

nobody help me? ..

↧

DN2820fyh win7 installation - usb keyboard not working

July 28, 2015, 12:18 am
$
0
0

apparently the win7 installation doesn't have usb 3 support? It got as far as the language entry screen for the installation cd and I couldn't use the keyboard and mouse any more. I had the keyboard plugged into a usb 3 nub connected to one of the back usb ports(not the front port). have flashed new bios 0051.

 

Can I try a different usb port or do I change bios settings to allow win7 to see the usb keyboard?

↧

Ich kann win7 Pro SP1 nicht auf NUC5i7RYH mit BIOS Version RY0249 installieren

July 21, 2015, 2:29 am
$
0
0

Nach dem Boot bleibt die Installation mit Windows wird geladen hängen.

Die Installation mit Windows 8 Embedded funktioniert auf der Maschine.

 

Hat jemand eine Idee?

↧
Viewing all 18457 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>