D3010WYK behavior on power loss
I have a couple d3010wyk boards running windows 7 x86 connected to UPS power supplies. When AC power is disconnected, the UPS shuts down the computer then disconnects power from the computer. At this...
View ArticleDC3217IYE Sata problem
Hello, i have the following msata drive installed: crucial 256gb sata 3 After running "as ssd" and "crystaldiskmark", the maximum sequential speed is no more than ~270MB/s. Hdtune is reporting the...
View ArticleIntel® NUC Kit D34010WYK Power Button
The power button on my NUC decided to stop working one day, and I'm not exactly sure why. For me, I use a Harmony 900 remote with a Microsoft IR profile, and the CIR sensor correctly starts up the NUC,...
View ArticleProblem with legacy boot
Hello, I just recently bought a NUC kit (D34010WYK), and I'm having trouble getting it to automatically boot with legacy BIOS. I have upgraded to BIOS upgrade #24 because the fix report looked like it...
View ArticleHaswell NUC CIR receiver (ACPI issue?)
The D54250WYK infrared receiver is not working out of the box in Linux. I have been testing this in 64bit Ubuntu 13.10 and OpenELEC 3.2.3. The following lines can be found in dmesg:[0.168692] pnp...
View ArticleGot issues with BIOS 026 and dual monitors
After updating BIOS from 025 to 026 i got no video at boot with dual monitors attached.Each separate monitor was ok to boot with, and in Windows I could connect the second monitor and everything was...
View ArticleClik here to view.
D54250WYK 'headless' issue?
So I just recently received one of these new machines. Overall I'm impressed but one thing I've noticed is that when no connected display is active - for example if the display port goes into a HDMI...
View ArticleD34010WYK + USB SoundCard + Netflix Win 8 App + 5.1 Sound = No go
Hi, I recently bought an External USB Sound Card to get optical SPDIF out from my NUC. It works perfekt in Windows Media Center and outputs Dolby Digital, DTS and Dolby Digital Plus to my...
View ArticleD54250WYK Not powering on by MCE remote
I was having an issue powering on the NUC using the power button on top so following information on XBMC forum I removed the CMOS battery for 10 minutes to let the BIOS completely reset to defaults....
View ArticleRemote boots one NUC, and not another
Hi there I'm having a really strange issue with my xbox 360 media remote. It can boot my dn2820 nuc, but NOT my d34010 i3 nuc. The remote DOES work when the OS has loaded, openelec in this case, for...
View ArticleDN2820FYKH won't install Windows 7 from USB
Hi all, I've had Ubuntu installed after some difficulty (mainly with creating a bootable USB on my Macbook) but decided I don't really like using it and would like to use Windows 7 instead as I have a...
View ArticleNeed scheduled wake and/or power-on in BIOS for signage
We're using the NUC for several digital signage setups, but what we really miss is the ability to schedule an automatic wake and/or power-on in the BIOS. From the OS, an auto wake does not always work...
View ArticleClik here to view.
Intel NUC DN2820FYKH
Hi, I got the dn2820fykh with BIOS version 015 installed.I installed Ubuntu 14.04 on the machine and also installed software to be able to remotely connect to the machine.Everything work fine, and the...
View ArticleF2 Entering BIOS
I can allways replicate F2 not working and also F2 that does work.NOTE: I am using HDMI port, not DP (dont know hot this is on DP, since I dont have DP-HDMI conversion cable). In my workplace I have...
View ArticleSystem panel connector for DN2820FYKH
Hi, We need to integrate an Intel NUC DN2820FYKH as a main controller for a robot prototype. To manage correctly the power on / shutdown procedure we need to interface our electronics to the...
View ArticleProblem with Profiles for NUC video drivers on Windows 8
I have had a NUC D34010WYKH for few weeks now. I ran into a Problem: Cannot change back to the default video profile. When I right-click on the desktop and go to [ Graphics Options > Profiles ]...
View ArticleD54250WYK with Dual Monitors
Greetings all, I am having an annoying issue with the D54250WYK and dual monitors via DisplayPort and HDMI. The underlying issue is probably related to another post seen here: D34010WYK crashes when...
View ArticleHow long will the Intel Haswell NUC's be made, sold and supported by Intel?
I am looking for a platform for a new product line and would like to know how long the Intel Haswell NUC's will be manufactured, sold and supported by Intel? Also, will the NUC support a half-height...
View ArticleClik here to view.
Netflix framedrops on nuc34010 win8.1 marantz avr
Hello, I recently bought a nuc d34010 to use as htpc.I updated all the bios/drivers to latest version.When I play Netflix with metro app, Ik will get hd picture and dd+ sound, but every 2 seconds I see...
View ArticleNUC Win 7 / 8 Drive Idle / Standby Problem
Has anyone else experienced problems in getting hard drives to spin down when idle running Win 7 or Win 8 on the NUC platform? I have some NUC DE3815TYK's Bios 0024 that I was hoping to use for an...
View Article