2560 x 1440 resolution with the D54250WYK
Hi, The D54250WYK's spec document here states that the MiniHDMI port supports maximum resolution of 1920 x 1200 @ 60 Hz,...
View ArticleDN2820FYKH DTS-HD?
I've setup my 2820 NUC kit, and under supported audio formats in windows 8.1 DTS-HD is not listed. I've installed all the drivers provided in the NUC driver bundle at Download Center , and attempted to...
View ArticleNUC D54250WYKH Firewire via Mini-PCI Express Slot...
I have a legacy audio headphone amplifier that has a Firewire 400 connection, i was wondering if it was possible to use this on my D54250WYKH via the Mini-PCI Express Slot? Here is an eBay listing for...
View ArticleD54250WYK Not powering on by MCE remote
I was having an issue powering on the NUC using the power button on top so following information on XBMC forum I removed the CMOS battery for 10 minutes to let the BIOS completely reset to defaults....
View ArticleCorrect way to update BIOS
I've read a couple of times on this forum that the correct way to update a BIOS is by avoiding jumps between versions, here: https://communities.intel.com/thread/51162and...
View ArticleNUC Haswell reboots after shutdown
If I chose shut-down it turns off but starts again. How so fix? Ubuntu 13.10. NUC Haswell BIOS version: 0022 (same with 0018). I just found this: Re: D54250WYK Shutdown Rebootsbut the asker didn't...
View ArticleClik here to view.
D54250WYK, Samsung U28D590D, 4K-resolution not working
Hi! Just purchased .. Intel NUC D54250WYK (bios 0026 / WYLPT10H.86A & latest drivers from Intel-site)Samsung U28D590D 4K-display (3840x2160 & 60Hz)Fuj:tech DisplayPort - Mini DisplayPort...
View ArticleDE3815TYKHE How to access I2C and PWM under win7
Hi,I have got the a.m. board and have installed Win7 + the IO drivers. Can somebody point me in the right direction of how to access the I2C and PWM ports under Win7.Horst
View ArticleUnable to boot with Intel NUC 2820 linux kernel > 3.14.5-1-ARCH
Hi Every kernel after 3.14.5-1-ARCH (even the newest 3.15.x release) causes boot problems on my Intel NUC 2820It is not able to boot into the system, not even to the stage where systemd is taking over....
View ArticleSsd write low
Hi My new haswell i5 Nuc is showing realy low write speeds when i benchmark it in nova bench its only 127 mb/s ? And yes ihave enable and disable all for it .Is it noc's sata bord that are that bad...
View ArticleIntel NUC does not recognize Samsung mSATA
I installed Intel NUC D54250WYKH with HDD and Samsung mSATA 840EVO. The HDD works fine but the mSATA is not recognized, even after upgrading to latest BIOS and Windows 7 64bit. The other PCIe device...
View ArticleINTEL NUC DRAWINGS [3D CAD] DE3815TYBE
I am looking to get dimensions for a DE3815TYBE. This includes component heights. Ideally this would be in the form of a 3D CAD file (i.e. step), but any format would do. The only dimensions that are...
View ArticleClik here to view.
Need a model/drawing of D54250WYB board
My company is trying to design NUC chassis. We use SolidWorks (I am an mechanical engineer). Without 3d model of the NUC motherboard it is almost impossible. I try to reverse-model it but it is a road...
View ArticleNetflix framedrops on nuc34010 win8.1 marantz avr
Hello, I recently bought a nuc d34010 to use as htpc.I updated all the bios/drivers to latest version.When I play Netflix with metro app, Ik will get hd picture and dd+ sound, but every 2 seconds I see...
View ArticlePROSet/Wireless Silent Install for v17.0
We're trying to do an autounattend (silent install) of Intel PROSet/Wireless Software. We're using the "Wireless_Win8.1_64_17.0.3.exe" executable and following the instructions found here.The...
View ArticleD54250WYK 'headless' issue?
So I just recently received one of these new machines. Overall I'm impressed but one thing I've noticed is that when no connected display is active - for example if the display port goes into a HDMI...
View ArticleHow long will the Intel Haswell NUC's be made, sold and supported by Intel?
I am looking for a platform for a new product line and would like to know how long the Intel Haswell NUC's will be manufactured, sold and supported by Intel? Also, will the NUC support a half-height...
View ArticleF2 Entering BIOS
I can allways replicate F2 not working and also F2 that does work.NOTE: I am using HDMI port, not DP (dont know hot this is on DP, since I dont have DP-HDMI conversion cable). In my workplace I have...
View ArticleNo wake up from s5 option in bios d34010
I have updated my d34010 nuc with latest drivers for windows 8.1 and bios.In het bios menu the option wake up from s5 is greyed out (I can not select it).I want to use my media enter remote to wake nuc...
View ArticleClik here to view.
Intel nuc resolution problems
i recently bought an intel nuc when i finally got it up and running i found that the picture was going off the screen. I use my intel nuc on my TV My TV model number: TX-P42S10BIntel nuc : Intel Core...
View Article