Windows Server 2012 R2 on DN2820FYKH
Has anyone had success running Windows Server 2012 R2 on the DN2820FYKH? This kit strikes me as a great low-power, low-cost development server. I've read about the issues running headless and from what...
View ArticleClik here to view.
DCCP847DYE powered by a 11.1v lipo battery?
Hi, I've read in other forums that users are able to power some NUC boards with 11.1 volt lipo battery? Is this specific board ( DCCP847DYE ) possible? Thank youEric
View ArticleN2820 and DisplayPort - Blank Screen on Dell Monitor
Hi, I have been trying to connect my new N2820 using the HDMI port to a Dell 2212HM monitor using an HDMI to DisplayPort adapter. The monitor detects a signal, but nothing shows at all, tried 2...
View ArticleD54250WYK Not powering on by MCE remote
I was having an issue powering on the NUC using the power button on top so following information on XBMC forum I removed the CMOS battery for 10 minutes to let the BIOS completely reset to defaults....
View ArticleD54250WYK, Samsung U28D590D, 4K-resolution not working
Hi! Just purchased .. Intel NUC D54250WYK (bios 0026 / WYLPT10H.86A & latest drivers from Intel-site)Samsung U28D590D 4K-display (3840x2160 & 60Hz)Fuj:tech DisplayPort - Mini DisplayPort...
View ArticleCapture and Display in Intel NUC Windows 7?
Hi All, We are planning to use Intel® NUC Kit D54250WYK or other similar kit with Windows 7 OS in our project. Project requirement is to capture video from USB 3.0 and display it on HDMI. Capture...
View ArticleD34010WYK Nuvoton CIR does not work always
Hi all, I have a second problem with the Nuvoton CIR.If I reboot the CIR works as expected, but if I you hibernation, then after several times of hibernate and resume the CIR does not work.No sigal...
View ArticleD54250WYK 'headless' issue?
So I just recently received one of these new machines. Overall I'm impressed but one thing I've noticed is that when no connected display is active - for example if the display port goes into a HDMI...
View ArticleD34010WYB CIR Win8.1 driver version mismatch
I am having difficulty getting the consumer IR port working with my D34010WYB on Win8.1 64-bit. I downloaded and installed the latest drivers from...
View ArticleClik here to view.
Intel® NUC Kit D34010WYK Power Button
The power button on my NUC decided to stop working one day, and I'm not exactly sure why. For me, I use a Harmony 900 remote with a Microsoft IR profile, and the CIR sensor correctly starts up the NUC,...
View ArticleDCCP847DYE powered by a 11.1v lipo battery?
Hi, I've read in other forums that users are able to power some NUC boards with 11.1 volt lipo battery? Is this specific board ( DCCP847DYE ) possible? Thank youEric
View ArticleNUC DE3815TYBE power supply question
The manuals for the DE3815TYBE motherboard shows two power inputs and several power ranges. The back panel DC connector is supposed to accept 12V (+/-10%) - 19V (+/-10%). The on-board Molex connector...
View ArticlePoor volume levels from N2820 running Windows 7?
So I mentioned this on another thread in relation to DTS-HD on the same platform, but given that its a different feature set I thought I would post a seperate thread. Running the latest (or any drivers...
View ArticleTrouble with Bitstreaming Audio & Video Artifacts/Corruption with 3D Blu-Ray...
Problem descriptionBitstreaming HD audio to AVR will malfunction intermittently while transitioning between titles on a Blu-Ray disc and HD audio tracks can no longer be heard playing in any movie.HDMI...
View ArticleD34010WYK Discrete PowerOn Logitech Harmony Hub and Firmware 0027
Hi Intel Team, I just downloaded and installed the firmware 0027.Before this update I used the firmeware 0026. After the update the discrete PowerOn command from the Harmony Hub (Profile Microsoft...
View ArticleWill a mini PCIe SATA RAID controller work in a NUC?
Is it possible to use a NUC's mPCIe slot for a SATA II RAID controller?Here is a link to the controller in question: StarTech Model MPEXSATA22I Mini PCI Express to SATA Card Add-On Card - Newegg.com I...
View ArticleDN2820FYKH blank screen at boot
I just received today from Amazon a DN2820FYKH to be used as a HTPC. I installed a Corsair 4GB DDR3L 1333MHz RAM module CMSO4GX3M1C1333C9 which is listed as 1.35 V and a OCZ vertex II SSD 60Gb.The NUC...
View ArticleClik here to view.
FW 27 for Haswell NUC - STILL not booting from USB3.0 !!!
As you didn't change anything I won't change my post: How is it possible that you still haven't solved the USB 3.0 isssues? - recognising USB 3.0 HW on startup fails almost ALWAYS!!! -->...
View ArticleClik here to view.
D54250WYK BIOS would not update to 207
Hello, When I try to update the BIOS to version 207 I get an error when flashing the Intel Management Interface firmware:A couple of weeks ago I manually upgraded this firmware to version 9.5.35.1862,...
View Articlewhy bootfailure with preinstalled (windows 8-64) 2,5-hdd?
I´m new in this field and want a tip, why my nuc2820 don´t love to boot with a preinstalled (Windows 8-64) 2,5-hdd. - Preinstalled means on an acer revo 80.
View Article